Heritage

Season 26
Types de médias
  • Photos
  • Vidéos
  • Sons
Années
  • 2026
  • 2024
  • 2023
  • 2022
  • 2021
  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
Afficher les résultats (121)
supprimer tous les filtres
  • News
  • Gallery
  • Gitana 18
  • Team
  • Retractable Y-shaped foils, adjustable in three dimensions

    Inspired by the appendages of the America's Cup foiling monohulls, these Y-shaped foils have a wingspan of over 5 metres. They are designed to generate powerful lift, increase power and offer a wide range of adjustments to optimise flight at every point of sail and in all conditions. Beyond their impressive size, these foils feature many unique innovations.

    Revolutionary U-shaped rudders

    These are probably the most visually striking innovations on the new Maxi Edmond de Rothschild. To fly high above rough seas while maintaining control, the team wanted very long rudders that would remain in contact with the water. The challenge is that longer rudders tend to flex under load, severely affecting steering and the efficiency of their lifting surfaces. A new geometry was needed to give these appendages maximum stiffness, resist cavitation and ultimately improve control of the boat and make better use of its power. The result is a set of U-shaped rudders over 4 metres long, a metre longer than those on Gitana 17. Their shape, reminiscent of a tripod or an inverted π, is only the visible part of what makes them so distinctive.

    A daggerboard optimised to stabilise the boat and limit cavitation

    With its wide span, the daggerboard resembles an aircraft tail assembly, with two adjustable flaps: one on the vertical section and the other on the horizontal section, the distinctive “manta-ray wing”. On Gitana 18, the innovation is to position this wing behind the vertical part of the appendage, rather than directly beneath it, to minimise flow disturbance and cavitation.

    Gitana 18’s daggerboard

    Rig: adjustable spreaders to control mainsail power while sailing

    Gitana 18’s mast is 1.50 metres taller than its predecessor’s. The boom is also shorter, creating a more slender sail plan. The major innovation is a set of spreaders that can be adjusted while sailing to bend the mast fore and aft. Actuated by hydraulic rams, these spreaders can pivot through 35 degrees to adjust the bend in the middle of the mast. This unprecedented system allows the sailor to control mainsail power: adding depth in light winds to take off sooner, or flattening the sail to reduce power at high speed or in strong winds. Adjusting the depth, and therefore the power, of the mainsail can also save a solo sailor time and energy by reducing the need for risky manoeuvres or headsail changes.

    Central hull:
    an integrated, structural coachroof

    The naval architects and Gitana design team wanted an exceptionally stiff, structurally robust platform. This applies both to the floats, which must withstand heavy loads from the foils and rudders, and to the central hull, which is subject to torsion. The enclosed coachroof is integrated into the hull and contributes to its structural strength. Inside, the cockpit brings all sail-handling controls together, with ergonomics shaped by many hours of design and development. The coachroof also stands out for the number and size of its windows. This configuration meets the visibility requirements of the Ultim class rules and gives sailors the best possible view to keep a visual watch.

    Gitana 18’s coachroof

    Team
    Photo de Charles Caudrelier

    Charles Caudrelier
    Skipper

    Officier de marine marchande de formation, Charles Caudrelier s’est forgé en 25 ans de carrière l’un des plus beaux palmarès de la...

    Photo de Cyril Dardashti

    Cyril Dardashti
    Directeur Général

    Arrivé au sein du Gitana Team en 2006 en qualité de directeur financier et administratif, Cyril Dardashti en devient le team manager...

    Photo de Pierre Tissier

    Pierre Tissier
    Directeur technique

    Photo de Sebastien Sainson

    Sebastien Sainson
    Directeur Bureau d'études

    Diplômé de l'école d'architecture navale de Southampton en 2011, Sébastien Sainson intègre le Gitana Team avec le projet du Multi70 Edmond de...

    Photo de Tiphaine Combot Seta

    Tiphaine Combot Seta
    Directrice communication

    Photo de Erwan Israël

    Erwan Israël
    Co-skipper, cellule performance et météo routage

    Photo de Julien Villion

    Julien Villion
    Navigant, responsable voiles, cellule météo routage

    Photo de David Boileau

    David Boileau
    Boat Captain, spécialiste de l'hydraulique

    Photo de Yann le Govic

    Yann le Govic
    Responsable gréement courant et dormant

    Photo de Nicolas le Griguer

    Nicolas le Griguer
    Responsable du secteur Électronique embarqué, acquisition, pilote automatique

    Photo de Olivier Guiguin

    Olivier Guiguin
    Secteur Electronique embarqué

    Photo de Alain Collecchia

    Alain Collecchia
    Responsable Mécanique, systèmes embarqués

    Photo de Alexandre Garcia

    Alexandre Garcia
    Mécanique, systèmes embarqués et usinage

    Photo de Thomas Rouelle

    Thomas Rouelle
    Responsable secteur matériaux composites

    Photo de Aloïs Fayot

    Aloïs Fayot
    Boat builder, spécialiste matériaux composites

    Photo de Michel Letty

    Michel Letty
    Peintre et finition appendices

    Photo de Stéphanie Lahaye

    Stéphanie Lahaye
    Secrétariat et comptabilité

    Photo de Bruno Laurent

    Bruno Laurent
    Mécanique, systèmes embarqués

    Photo de An Bernard

    An Bernard
    Ingénieur structure, Calculs et éléments finis

    Photo de Alice Duvivier

    Alice Duvivier
    Architecte navale, VR, ergonomie et plan de pont

    Photo de Félix Tiphaine

    Félix Tiphaine
    Ingénieur, conception appendices et outils numériques

    Photo de Yannis Troalen

    Yannis Troalen
    Architecte naval, référent gréement, simulation, VPP

    Photo de Ludovic Le Noc

    Ludovic Le Noc
    Ingénieur, conception systèmes mécaniques et hydrauliques

    Photo de Malo Bellec

    Malo Bellec
    Architecte naval, conception appendices et plateforme

    Photo de Thomas Bled

    Thomas Bled
    Architecte naval, conception systèmes d'appendices et plateforme

    Photo de Isaac Verdier

    Isaac Verdier
    Alternant bureau d'études

    Photo de Yann Riou

    Yann Riou
    Navigant, équipier Média

    Précédent
    Suivant